16 Products found
Result 1- 16 of 16
Multiple Options

Complete the application of a plate-sealing film by pressing with this Sealing Paddle. Assures a secure and uniform seal around all wells. Paddles are recommended for films on raised-rim plates because they fit within the plate rim. Pack of 5.


Multiple Options

Well Orienters

For Easy Pipetting and Identification of Samples in Microplates


Multiple Options

Designed to directly print text, linear barcodes, 2D codes and graphics on tubes using patent pending Thermal Pixel Printing technology

  • Prints directly on the surface of tubes from 0.5 ml to 15 ml - Labels or stickers are not required
  • Clearer and more durable marking compared to marker pen - Consistently legible text and barcodes at high resolutions
  • Resistant to alcohol, water, liquid nitrogen, DMSO and mechanical abrasion - Long lasting sample identification at competitive per mark cost.

 

The TubeMarker allows printing directly onto the surface of plastic laboratory tubes between 8 mm - 25 mm* in diameter.

There is no need for using labels or marker pens. Marking is resistant to ethanol, isopropanol, water, DMSO, liquid nitrogen and mechanical abrasion. The prints are also stable over a wide temperature range (-196°C to 100°C). Markings do not transfer when touching the tubes.

Several lines of text can be printed, for example sample name, sampling site, your name, date, time etc. All TrueType fonts available on the connected computer can be printed with different font types and sizes, determining the maximum printed content. Bold and italic type is also possible.

The instrument also prints linear barcodes, 2D codes and graphic files (monochrome .bmp, .gif, .tiff) such as logos. Print orientation can be vertical or horizontal (except for barcodes which print vertically only).

Printing straight to the tube surface is much easier and faster than marking by hand.

Download 4titude 0680 Specification Sheet

Download 4titude 0680 Instruction Manual


Multiple Options

Rigid polycarbonate Vari-Plate frames for use with Vari-Strips

These Vari-Plate frames are moulded from rigid polycarbonate for use with our polypropylene Vari-Strips.

The Vari-Strips are inserted into the Vari-Plate frames to form a complete plate, part plate, or individual strip with an easy-to-handle frame.

As the Vari-Strips are interchangeable with the Vari-Plate frames, the frames themselves are re-useable; simply purchase more Vari-Strips to use.



Multiple Options

TLC Reagent Sprayers

TLC Reagent Sprayers deliver a uniform spray mist of visualization reagents for TLC and Paper Chromatography. Spray pattern is adjusted by varying the position of the thumb on the vent hole. TLC reagents or corrosive liquids touch only the nonreactive borosilicate glass atomizing sprayer head and flask. Sprayers feature a head-to-flask connection that consists of a screw-thread ground joint, a connecting cap, and a loosening ring. If reagent crystallization or residue formation causes the joint to freeze, unscrew the cap back onto the ring and the joint will easily come apart. Sprayers operate on as little as 1psi (0.07 kg/cm2), although optimum results are obtained at 3 to 5psi (0.21 to 0.35 kg/cm2). Remove connecting cap, loosening ring and O-ring before autoclaving.


Multiple Options

Kimble Chase TLC Developing Tanks

Develop thin layer chromatography (TLC) plates up to 20 x 20cm in this rectangular TLC Developing Tank. Made from molded glass with clear sides that allow visual inspection or photography. The top edges of the tank are ground flat to match the lids, and beveled to remove sharp edges. The tank™s bottom is ground flat to provide a level surface for stability. The inside bottom has a raised ridge that allows the simultaneous development of two 20 x 20cm or four 5 x 20cm plates. Tanks come with one of three lids: standard, nonslip or latched. Nonslip lids have a knob for easy lifting and PTFE retainers inside that prevent the lid from accidentally slipping off. Latch lids have stainless steel latches that hold the lid firmly to the tank, significantly improving the stability of the saturated environment for developing TLC plates. Latch lids also have a knob and the PTFE retainers. The tank™s inside dimensions: 9-3/4H x 10-5/8W x 2-7/8D (25 x 27 x 7cm). Weight: 12 lbs (5.4kg).


Multiple Options

The Nunc Amplification Workstation can be used on the bench-top and then easily transported to a thermal cycler or freezer for storage. The tray holds most V-bottom 0.2mL tubes and plates and can be removed from the holder once loaded. After a PCR application, the tray can be returned to the holder and covered with a transparent polystyrene lid for convenient stacking and freezer storage. Withstands temperatures ranging from -4°F to 230°F (-20°C to 110°C).


# P98-780

4titude 4ti-0398 96 Pin Pierce Plate, 4titude, 4ti-0398, 96 Pin Pierce Plate Machine-engineered metal block Enables instant access to samples, 96 Pin Pierce Plate A metal block with 96 aligned pins for piercing every well of a heat or ad


# P98-736

4titude 4ti-0655 4s3 Semi-Automatic Sheet Heat Sealer, 4titude, 4ti-0655, Automatic sealing process for unmatched sealing consistency Variable temperature and time settings for easy optimisation of sealing conditions Simple, single button operati


# C61-992

RNase AWAY, 1L Bottle, 5/cs, Molecular Bio Products, 7003 , RNase AWAY, 1L Bottle, 5/cs, RNase AWAY, 1L Bottle, 5/cs, 70.0200, CS, , | LabSource.com


# L60-691

Diversified Biotech WEST-1000 96-Well Orienter Stickers - 50/pk, Diversified Biotech, WEST-1000, 96-Well Orienter Stickers 50/pk, Well Orienter Stickers Permanently label mutliple microplates with clear Well Orienter Stickers. Each well is


# C61-990

RNAse Away, 250ml, Molecular Bio Products, 7000, RNAse Away, 250ml, RNAse Away, 250ml, 438.9600, CS/12EA, , | LabSource.com


# P98-740

4titude 4ti-0665 a4S Automatic Roll Heat Sealer, 4titude, 4ti-0665, Simple Installation No need for compressed air - Installation is fast and flexible 2 positions for different roll sizes - Increased flexibility Optional roll cover - Seal p


# C61-996

DNA Away, Surface Decontaminant, 250ml, 12/cs, Molecular Bio Products, 7010, DNA Away, Surface Decontaminant, 250ml, , DNA Away, Surface Decontaminant, 250ml, 12/cs, 338.6400, CS/12EA, , | LabSource.com


# C61-993

RNase AWAY, 4L Bottle, ea, 4/cs, Molecular Bio Products, 7005-11, RNase AWAY, 4L Bottle, ea, 4/cs, RNase AWAY, 4L Bottle, ea, 4/cs, 560.1200, CS/4EA, , | LabSource.com